Products
All technical data presented represent typical results, unless stated otherwise as min/max values.
No guarantee is made that material will meet exactly the values shown.
Electrolyte Filler VD102AS (cylindrical cans)
Model: VD102AS
1. Objective
The VD102AS efficiently injects electrolyte into a battery can within an evacuated cell.With one button, the can holder will rise to create a vacuum, and the electrolyte will befilled into the can after precisely measured at the pump.
I. The injection amount is precisely measured using a motor drive pump.Setting the injection amount is easy.
II. The injection speed can be controlled at any setting using a flow control pump.
III. The electrolyte is injected from a stock tank through a flow control pump.
IV. Because the injection conditions, such as a pressure reduction, holding, theinjection, a pressure increase, can be independently set.
V. A vacuum level, injection rate, etc. can be adjusted manually.
|
2. Specifications |
||
| a. Application: | Electrolyte vacuum injection machine for lab use. | |
| b. Power: | AC100V, 50/60Hz 200W | |
| c. Controller: | Sequence control | |
| d. Compressor supply: | 9.9kgf/cm2 or less (argon/N2) | |
| e. Amount of injection: | 1.0-7.8cc : HFP-12A | |
| f. Flow rate of injection: | 0.3cc/sec. Or Up | |
| g. Max. Vacuum: | -97kPa (-730mmHg) | |
| h. Max. Pressure: | 196kPa (2.0kg/cm2) | |
| i. Exterior dimensions: |
Main body 300W x 450H x 370D Vacuum Pump 122W x 160H x 203D |
|
| j. Weight: | Main body approx. 25kg | |
| k. Standard accessory: | Battery holder (18650), nozzle, and an operational manual | |
Process Flow Diagram
Appearance
