Products
All technical data presented represent typical results, unless stated otherwise as min/max values.
No guarantee is made that material will meet exactly the values shown.
Roll Press HSRP-1625
This roll press is to press and adjust density/thickness of electrode sheets with two metal rolls.
| Model: | HSRP-1625 | |
| Top Roll: | Dia 160mm x 250mm W | |
| Bottom Roll: | Dia 160mm x 250mm W | |
| Roll Material: | SKD11, Hard-Chrome Plating | |
| Roll Tolerance: | <0.003mm | |
| Press Width: | <200mm | |
| Press Method: | Mechanical with screw | |
| Maximum Load: | 1,000kg | |
| Roll Gap: | 0~1mm | |
| Gap Control: | Two handles at both ends. Monitor: by 0.001mm with Digital Screw Encoder (Digi-collar) and monitor | |
| Press Speed: | 0.1~1.0m/min by geared motor: forward or reverse | |
| Electrode Supply: | Manually, sheet by sheet | |
| Safety Features: |
Safety door at electrode entrance: with a limit switch. |
|
| Power: |
AC 200V, 15A, 3 phase, 5m long cable No plug attached. |
|
| Size: | Press: | 500mm W x 750mm D x 635mm H |
| Circuit Box: | 400mm W x 200mm D x 500mm H | |
| Weight: | 250kg | |
| Optional Functions at additional cost: | ||
|
Table frame with wheels and locks Size: 650mm W x 864mm D x 700mm H Weight: 100kg Digital dial guage for gap monitor Digital load guage Digital speed monitor |
||
* The specifications are subject to change.
Application: Advanced energy
Product type: Machinery